Bravewolf Customs parts and accessories for your thunderstroke model Indian
174 products
174 products
Chief Warbonnet 96 - 5 Inch Decal
Regular price $20.00
Shipping calculated at checkout.
Special Order Item (may not always be in stock and could take approximately two weeks before shipping)
“CWB-96” 5 inch Decal
These decal inserts have a 5 inch diameter which makes them a perfect fit for the Thunderstroke engine airbox (for models with a round emblem). Check out the photos, and if your bike has the same style airbox, these are a match!
Size: 5 inch diameter circle
Weatherproof laminated decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
EXAMPLE PLACEMENT
SKULL WARBONNET 108 - 5 Inch Decal
Regular price $20.00
Shipping calculated at checkout.
Special Order Item (may not always be in stock and could take approximately two weeks before shipping)
“SWB-108” 5 inch Decal
These decal inserts have a 5 inch diameter which makes them a perfect fit for the Thunderstroke engine airbox (for models with a round emblem). Check out the photos, and if your bike has the same style airbox, these are a match!
Size: 5 inch diameter circle
Weatherproof laminated decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
EXAMPLE PLACEMENT
Female Warbonnet 119 - 5 Inch Decal
Regular price $20.00
Shipping calculated at checkout.
Special Order Item (may not always be in stock and could take approximately two weeks before shipping)
“FWB-119” 5 inch Decal
These decal inserts have a 5 inch diameter which makes them a perfect fit for the Thunderstroke engine airbox (for models with a round emblem). Check out the photos, and if your bike has the same style airbox, these are a match!
Size: 5 inch diameter circle
Weatherproof laminated decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
EXAMPLE PLACEMENT
Female Warbonnet 123 - 5 Inch Decal
Regular price $20.00
Shipping calculated at checkout.
Usually in-stock (if out of stock, could take approximately two weeks before shipping)
“FWB-123” 5 inch Decal
These decal inserts have a 5 inch diameter which makes them a perfect fit for the Thunderstroke engine airbox (for models with a round emblem). Check out the photos, and if your bike has the same style airbox, these are a match!
Size: 5 inch diameter circle
Weatherproof laminated decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
EXAMPLE PLACEMENT
Dark Horse - Saddlebag - V2 - Rounded Bags
Regular price $100.00
Shipping calculated at checkout.
SPECIAL ORDER - these decals may take approximately two weeks before shipping due to manufacturing times
Give your motorcycle a custom look with these Dark Horse saddlebag decals! They are designed for both versions of Indian saddlebags, the common style, and the newer style. Although they were designed for the saddlebags, you can use these decals wherever you want. Just be sure to measure the size of where you want to apply them to ensure they will fit.
Size:
| Style | Inches | Centimeters |
| Version 2 (Common style bags) | 23.3807 in x 8.6321 in | 59.436 x 21.84 cm |
Material: A material originally made for motocross, these decals can really take a beating. They are not your everyday "sticker". These decals are printed on a hi-tack vinyl and laminated with a 12-mil glossy PVC laminate or with a sandy matte texture (your choice). It is weather proof, temperature and UV resistant, and will maintain its quality for years.
What is included: Matching set of left and right facing decals. Application suitable for Motorcycles, cars, trucks, windows, tables and more.
Installation: We recommend using the wet method to install decals of this size. Take a look at this video made by TAB Performance during their installation of our decals.
Surtr in Muspelheim - New Style Indian Saddlebag Decal Set - B&W
Regular price $180.00
Shipping calculated at checkout.
Stock Notice: (may take approximately 2-3 weeks before shipping if not in stock at the time of your order)
Our saddlebag decals are made from premium weatherproof hi-tack vinyl with a long lifespan that will keep them looking new for years. They are available in two finishes, heavy-duty 12 mil laminated Gloss (looks like it's painted on), or a heavy-duty sandy matte textured premium finish.
|
Fitment Guide: Fits the new style (squared) Indian OEM saddlebags. Also fits the Challenger & Pursuit when the plastic bag guard is removed. |
Installation:
Installing our decals is easy to do yourself at home. We recommend removing all of the excess decal material (the background image) before installing the decals. This will allow you to dispose of all the small cut-out pieces so that the pieces do not get trapped underneath your decal when installing it on the bike. Once you have all of the small pieces and background removed, you can use the "wet method" to install the decals to your saddlebags. The wet method involves using a spray bottle of water with a couple drops of dish soap in the mixture and spraying the surface of your saddlebags to wet the entire surface. Then carefully remove the backing from your decal and use the spray bottle to wet the adhesive side of the decal. Now you can gently place the decal on your saddlebag. Because the surfaces are wet, you can pull the decal up to reposition it until you get it where you want it. Once it's in place, use a squeegee or other object such as a credit card wrapped in a microfiber towel to squeeze the water out from behind the decal. You can also use your hands to do this. You should take care not to use a hard/abrasive object that can scratch the decals or your bike's paint. The high-tack adhesive will begin to set/adhere to the bike as soon as the liquid is push out from behind the decal. Use caution to ensure the towel or object you are using does not catch any edges of the decal and pull it off your bike. If you take your time and be gentle during installation, it should be an easy process. A hair dryer can be used to speed up the drying process if needed.
Feel free to visit our How-To page on the website to watch a "wet method" installation video.
Odin - New Style Indian Saddlebag Decal Set - B&W
Regular price $180.00
Shipping calculated at checkout.
Stock Notice: (may take approximately 2-3 weeks before shipping if not in stock at the time of your order)
Our saddlebag decals are made from premium weatherproof hi-tack vinyl with a long lifespan that will keep them looking new for years. They are available in two finishes, heavy-duty 12 mil laminated Gloss (looks like it's painted on), or a heavy-duty sandy matte textured premium finish.
|
Fitment Guide: Fits the new style (squared) Indian OEM saddlebags. Also fits the Challenger & Pursuit when the plastic bag guard is removed. |
Installation:
Installing our decals is easy to do yourself at home. We recommend removing all of the excess decal material (the background image) before installing the decals. This will allow you to dispose of all the small cut-out pieces so that the pieces do not get trapped underneath your decal when installing it on the bike. Once you have all of the small pieces and background removed, you can use the "wet method" to install the decals to your saddlebags. The wet method involves using a spray bottle of water with a couple drops of dish soap in the mixture and spraying the surface of your saddlebags to wet the entire surface. Then carefully remove the backing from your decal and use the spray bottle to wet the adhesive side of the decal. Now you can gently place the decal on your saddlebag. Because the surfaces are wet, you can pull the decal up to reposition it until you get it where you want it. Once it's in place, use a squeegee or other object such as a credit card wrapped in a microfiber towel to squeeze the water out from behind the decal. You can also use your hands to do this. You should take care not to use a hard/abrasive object that can scratch the decals or your bike's paint. The high-tack adhesive will begin to set/adhere to the bike as soon as the liquid is push out from behind the decal. Use caution to ensure the towel or object you are using does not catch any edges of the decal and pull it off your bike. If you take your time and be gentle during installation, it should be an easy process. A hair dryer can be used to speed up the drying process if needed.
Feel free to visit our How-To page on the website to watch a "wet method" installation video.
Surtr in Muspelheim - New Style Indian Saddlebag Decal Set
Regular price $180.00
Shipping calculated at checkout.
Stock Notice: (may take approximately 2-3 weeks before shipping if not in stock at the time of your order)
Our saddlebag decals are made from premium weatherproof hi-tack vinyl with a long lifespan that will keep them looking new for years. They are available in two finishes, heavy-duty 12 mil laminated Gloss (looks like it's painted on), or a heavy-duty sandy matte textured premium finish.
|
Fitment Guide: Fits the new style (squared) Indian OEM saddlebags. Also fits the Challenger & Pursuit when the plastic bag guard is removed. |
Installation:
Installing our decals is easy to do yourself at home. We recommend removing all of the excess decal material (the background image) before installing the decals. This will allow you to dispose of all the small cut-out pieces so that the pieces do not get trapped underneath your decal when installing it on the bike. Once you have all of the small pieces and background removed, you can use the "wet method" to install the decals to your saddlebags. The wet method involves using a spray bottle of water with a couple drops of dish soap in the mixture and spraying the surface of your saddlebags to wet the entire surface. Then carefully remove the backing from your decal and use the spray bottle to wet the adhesive side of the decal. Now you can gently place the decal on your saddlebag. Because the surfaces are wet, you can pull the decal up to reposition it until you get it where you want it. Once it's in place, use a squeegee or other object such as a credit card wrapped in a microfiber towel to squeeze the water out from behind the decal. You can also use your hands to do this. You should take care not to use a hard/abrasive object that can scratch the decals or your bike's paint. The high-tack adhesive will begin to set/adhere to the bike as soon as the liquid is push out from behind the decal. Use caution to ensure the towel or object you are using does not catch any edges of the decal and pull it off your bike. If you take your time and be gentle during installation, it should be an easy process. A hair dryer can be used to speed up the drying process if needed.
Feel free to visit our How-To page on the website to watch a "wet method" installation video.
Chief Warbonnet 100 - 5 Inch Decal
Regular price $20.00
Shipping calculated at checkout.
Special Order Item (may not always be in stock and could take approximately two weeks before shipping)
“CWB-100” 5 inch Decal
These decal inserts have a 5 inch diameter which makes them a perfect fit for the Thunderstroke engine airbox (for models with a round emblem). Check out the photos, and if your bike has the same style airbox, these are a match!
Size: 5 inch diameter circle
Weatherproof laminated decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
EXAMPLE PLACEMENT
SKULL WARBONNET X HATCHET - 5 Inch Decal
Regular price $20.00
Shipping calculated at checkout.
Special Order Item (may not always be in stock and could take approximately two weeks before shipping)
“SWB X HATCHET” 5 inch Decal
These decal inserts have a 5 inch diameter which makes them a perfect fit for the Thunderstroke engine airbox (for models with a round emblem). Check out the photos, and if your bike has the same style airbox, these are a match!
Size: 5 inch diameter circle
Weatherproof laminated decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
EXAMPLE PLACEMENT
SKULL WARBONNET & BREASTPLATE - 5 Inch Decal
Regular price $20.00
Shipping calculated at checkout.
Special Order Item (may not always be in stock and could take approximately two weeks before shipping)
“SWB & BREASTPLATE” 5 inch Decal
These decal inserts have a 5 inch diameter which makes them a perfect fit for the Thunderstroke engine airbox (for models with a round emblem). Check out the photos, and if your bike has the same style airbox, these are a match!
Size: 5 inch diameter circle
Weatherproof laminated decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
EXAMPLE PLACEMENT
Female Warbonnet 18167678 - 5 Inch Decal
Regular price $20.00
Shipping calculated at checkout.
Special Order Item (may not always be in stock and could take approximately two weeks before shipping)
“FWB-18167678” 5 inch Decal
These decal inserts have a 5 inch diameter which makes them a perfect fit for the Thunderstroke engine airbox (for models with a round emblem). Check out the photos, and if your bike has the same style airbox, these are a match!
Size: 5 inch diameter circle
Weatherproof laminated decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
EXAMPLE PLACEMENT
NEW Skull Warbonnet - Thunderstroke Models Color
Regular price $100.00
Shipping calculated at checkout.
New Item - Special Order (may take up to two weeks before shipping)
“NEW Skull Warbonnet for Thunderstroke Models (Color Version)”
Size: Large decal that covers Original logos on the tank.
Weatherproof laminated decals are self adhesive. We recommend using the wet method to install larger decals: A spray bottle with water and dish soap can be used to wet the tank and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use a squeegee or some non-abrasive tool (even your fingers) to push the moisture out from behind the decal and it will adhere to your tank.
