Decals for all brands and models of motorcycles
76 products
76 products
MesoChief 3-2023 - Universal Tank Decal-B&W
Regular price $100.00
Shipping calculated at checkout.
New Item - Special Order (may take approximately two+ weeks before shipping)
“MesoChief 3-2023" Universal Tank Decals for all Brands and Models of Motorcycles
These decals were designed to cover the original headdress on Indian Motorcycles but can be used by any brand or model of bike.
If you have an Indian Scout, we recommend purchasing our Scout version which is slightly smaller in order fit on the tank side without extending over the border.
Size: 5.9 inches by 14.6 inches wide
These decals are designed for all brands/models of motorcycles. Check the measurements to ensure a proper fit on your bike before ordering. If your tank already has a graphic, we can’t guarantee these decals will cover it completely. To verify fit and coverage, print out the template below, cut it out and tape it to your tank. (Print out template will be added soon)
How To Install: <-Visit our How To page for videos
Weatherproof HD Gloss finish vinyl decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
MesoChief 3-2023 - Universal Tank Decal-Color
Regular price $100.00
Shipping calculated at checkout.
New Item - Special Order (may take approximately 2-3 weeks before shipping if we don't have it in stock at the time of your order)
“MesoChief 3-2023" Universal Tank Decals for all Brands and Models of Motorcycles
These decals were designed to cover the original headdress on Indian Motorcycles but can be used by any brand or model of bike.
If you have an Indian Scout, we recommend purchasing our Scout version which is slightly smaller in order fit on the tank side without extending over the border.
Size: 5.9 inches by 14.6 inches wide
These decals are designed for all brands/models of motorcycles. Check the measurements to ensure a proper fit on your bike before ordering. If your tank already has a graphic, we can’t guarantee these decals will cover it completely. To verify fit and coverage, print out the template below, cut it out and tape it to your tank. (Print out template will be added soon)
How To Install: <-Visit our How To page for videos
Weatherproof HD Gloss finish vinyl decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
MesoChief 2-2023 - Universal Tank Decal-B&W
Regular price $100.00
Shipping calculated at checkout.
RETIRING ITEM - only a few remaining in matte finish
“MesoChief 2-2023" Universal Tank Decals for all Brands and Models of Motorcycles
These decals were designed to cover the original headdress on Indian Motorcycles but can be used by any brand or model of bike.
If you have an Indian Scout, we recommend purchasing our Scout version which is slightly smaller in order fit on the tank side without extending over the border.
Size: 6.6 inches by 15 inches
These decals are designed for all brands/models of motorcycles. Check the measurements to ensure a proper fit on your bike before ordering. If your tank already has a graphic, we can’t guarantee these decals will cover it completely. To verify fit and coverage, print out the template below, cut it out and tape it to your tank. (Print out template will be added soon)
How To Install: <-Visit our How To page for videos
Weatherproof HD Gloss finish vinyl decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
Kateri 2023 - Universal Tank Decal-Color
Regular price $100.00
Shipping calculated at checkout.
New Item - Special Order (may take approximately two+ weeks before shipping)
“Kateri 2023" Universal Tank Decals for all Brands and Models of Motorcycles
These decals were designed to cover the original headdress on Indian Motorcycles but can be used by any brand or model of bike.
If you have an Indian Scout, we recommend purchasing our Scout version which is slightly smaller in order fit on the tank side without extending over the border.
Photo courtesy of Dino Martinez
Size: Will be posted soon
These decals are designed for all brands/models of motorcycles. Check the measurements to ensure a proper fit on your bike before ordering. If your tank already has a graphic, we can’t guarantee these decals will cover it completely. To verify fit and coverage, print out the template below, cut it out and tape it to your tank. (Print out template will be added soon)
How To Install: <-Visit our How To page for videos
Weatherproof HD Gloss finish vinyl decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
Odin's Ravens Universal Tank Decals - Blue
Regular price $100.00
Shipping calculated at checkout.
New Item - Special Order (may take up to two weeks before shipping)
Blue “Odin's Ravens" Tank Decal set for all brands/models of motorcycle
The artwork for these decals was sponsored by Tyler Cramer. Featuring Odin's two ravens, Huginn and Muninn (one for each side of the tank).
Size: 15.25 x 5 inches
These decals are designed for all brands/models of motorcycles. Check the measurements to ensure a proper fit on your bike before ordering. If your tank already has a graphic, there's a chance that these decals will not cover it completely. To verify fit and coverage, print out the template below, cut it out and tape it to your tank.
How To Install: <-Visit our How To page for videos
Weatherproof HD Gloss finish vinyl decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
Odin's Ravens Universal Tank Decals - White
Regular price $100.00
Shipping calculated at checkout.
New Item - Special Order (may take up to two weeks before shipping)
“Odin's Ravens" Tank Decal set for all brands/models of motorcycle
The artwork for these decals was sponsored by Tyler Cramer. Featuring Odin's two ravens, Huginn and Muninn (one for each side of the tank).
Size: 15.25 x 5 inches
These decals are designed for all brands/models of motorcycles. Check the measurements to ensure a proper fit on your bike before ordering. If your tank already has a graphic, there's a chance that these decals will not cover it completely. To verify fit and coverage, print out the template below, cut it out and tape it to your tank.
How To Install: <-Visit our How To page for videos
Weatherproof HD Gloss finish vinyl decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
Fenrir - Universal Tank Decal
Regular price $100.00
Shipping calculated at checkout.
New Item - Special Order (may take approximately two weeks before shipping)
“Fenrir" Universal Tank Decals for all Brands and Models of Motorcycles
This design was custom commissioned and our client has graciously allowed us to share it with other customers.
Size: 15.26 x 5.85 inches
These decals are designed for all brands/models of motorcycles. Check the measurements to ensure a proper fit on your bike before ordering. If your tank already has a graphic, we can’t guarantee these decals will cover it completely. To verify fit and coverage, print out the template below, cut it out and tape it to your tank.
How To Install: <-Visit our How To page for videos
Weatherproof HD Gloss finish vinyl decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
Odin's Ravens Universal Tank Decals - Red
Regular price $100.00
Shipping calculated at checkout.
New Item - Special Order (may take up to two weeks before shipping)
“Odin's Ravens" Tank Decal set for all brands/models of motorcycle
The artwork for these decals was sponsored by Tyler Cramer. Featuring Odin's two ravens, Huginn and Muninn (one for each side of the tank).
Size: 15.25 x 5 inches
These decals are designed for all brands/models of motorcycles. Check the measurements to ensure a proper fit on your bike before ordering. If your tank already has a graphic, there's a chance that these decals will not cover it completely. To verify fit and coverage, print out the template below, cut it out and tape it to your tank.
How To Install: <-Visit our How To page for videos
Weatherproof HD Gloss finish vinyl decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
MMIW Red Hand - Anywhere Decal
Regular price $40.00 Sale price $30.00 Save $10.00
Shipping calculated at checkout.
New Item - Special Order (may take up to two weeks before shipping)
“MMIW Red Hand” Anywhere Decal - A Charity Drive Project
Missing and Murdered Indigenous Women is an epidemic of violence against Indigenous women in Canada, the United States, and Latin America; notably those in the FNIM and Native American communities. Across Latin America, it is estimated that Indigenous women and girls are disproportionately the victims of femicide.
STATISTICS
- Indigenous Women (girls +) murdered 10x higher than all other ethnicities.
- Murder is the 3rd leading cause of death for Indigenous Women (Centers for Disease Control).
- More than 4 out of 5 Indigenous Women have experienced violence (84.3%) (National Institute of Justice Report).
- More than half Indigenous Women experience sexual violence (56.1%).
- More than half Indigenous Women have been physically abused by their intimate partners (55.5 percent).
- 48.8% of Indigenous Women have been stalked in their lifetime.
- Indigenous Women are 1.7 times more likely than Anglo-American women to experience violence.
- Indigenous Women are 2xs more likely to be raped than Anglo-American white women.
- Murder rate of Indigenous Women is 3xs higher than Anglo-American women.
These decals are meant to bring awareness to this issue and can be used anywhere. Brave Wolf Customs will donate $15 from each order to a non-profit charitable organization whose mission is to offer support to the MMIW demographic.
Size: 7.5 x 7.2 inches each when displayed in the orientation of the image below
Weatherproof HD Gloss finish vinyl decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
Zombie Hands 001-B&W Anywhere Decal Set
Regular price $20.00
Shipping calculated at checkout.
Usually in stock - (if not in stock at time of order may take approximately two weeks before shipping)
“Zombie Hands 001” Anywhere Decal Set
These decals are meant to be used anywhere. We wanted to provide more options that allow you to customize the look of your bike while using the same high-quality materials we use for our tank and saddlebag decals.
Size: 2.4 x 5 Inches each (set of left and right decals)
Matte finish pictured above
Weatherproof laminated decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
Tentacles 279-Color Anywhere Decal
Regular price $15.00 Sale price $10.00 Save $5.00
Shipping calculated at checkout.
Usually in stock - (if not in stock at time of order may take approximately two weeks before shipping)
“Tentacles 279” Anywhere Decal
These decals are meant to be used anywhere. We wanted to provide more options that allow you to customize the look of your bike while using the same high-quality materials we use for our tank and saddlebag decals.
Size: 3 x 5 inches
Gloss Finish pictured above
Weatherproof laminated decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
Devil Girl Pinup 181-Color Anywhere Decal
Regular price $30.00 Sale price $20.00 Save $10.00
Shipping calculated at checkout.
Usually in stock - (if not in stock at time of order may take approximately two weeks before shipping)
“Devil Girl Pin-up 181” Anywhere Decal
These decals are meant to be used anywhere. We wanted to provide more options that allow you to customize the look of your bike while using the same high-quality materials we use for our tank and saddlebag decals.
Size: 4.5 x 5 inches each (set of left and right facing)
Matte finish pictured above
Weatherproof laminated decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
Devil Girl Pinup 181-B&W Anywhere Decal
Regular price $30.00 Sale price $20.00 Save $10.00
Shipping calculated at checkout.
Usually in stock - (if not in stock at time of order may take approximately two weeks before shipping)
“Devil Girl Pin-up 181” Anywhere Decal
These decals are meant to be used anywhere. We wanted to provide more options that allow you to customize the look of your bike while using the same high-quality materials we use for our tank and saddlebag decals.
Size: 2.4 x 5 inches each (set of left and right facing)
Gloss pictured above
Weatherproof laminated decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
Devil Girl Pinup 170-Color Anywhere Decal
Regular price $15.00
Shipping calculated at checkout.
Usually in stock - (if not in stock at time of order may take approximately two weeks before shipping)
“Devil Girl Pin-up 170” Anywhere Decal
These decals are meant to be used anywhere. We wanted to provide more options that allow you to customize the look of your bike while using the same high-quality materials we use for our tank and saddlebag decals.
Size: 2.4 x 5 inches each (set of left and right facing)
Matte finish pictured above
Weatherproof laminated decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
