12 products
Powerplus V-Cover Decal - Marines
Regular price $20.00Fits the Indian Powerplus engine found on the Challenger, Pursuit, Powerplus Chieftain, and Powerplus Roadmaster models.
This premium finish badge cover takes minutes to install and provides a completely custom look. They fit both the left and right v-cover so if you haven't removed the right side cover for another intake, don't forget to grab two!
The v-cover decals are heavy-duty 12 mil laminated gloss vinyl that flow over the curves of the badge for a bespoke custom look.
These self-adhesive decals are applied by hand to the 1901 badge. If you've already removed the badge, you can use poster putty to fill in the embossed letters before applying our decal over it.
Installation: Be sure your v-cover badge is clean before installing the decal. Peel the decal off of the backing sheet, careful not to touch the adhesive side of the decal too much. Carefully align it to a centered position (the decal is slightly smaller than the badge). Press the decal firmly down in the center to stick it in place, then use your thumbs to push out from the center to the edges. Repeat this process until you've stretched/pressed it firmly down around the curves. And that's it!
How-to Video:
Powerplus V-Cover Decal - American Flag (Color)
Regular price $20.00Fits the Indian Powerplus engine found on the Challenger, Pursuit, Powerplus Chieftain, and Powerplus Roadmaster models.
This premium finish badge cover takes minutes to install and provides a completely custom look. They fit both the left and right v-cover so if you haven't removed the right side cover for another intake, don't forget to grab two!
The v-cover decals are heavy-duty 12 mil laminated gloss vinyl that flow over the curves of the badge for a bespoke custom look.
These self-adhesive decals are applied by hand to the 1901 badge. If you've already removed the badge, you can use poster putty to fill in the embossed letters before applying our decal over it.
Installation: Be sure your v-cover badge is clean before installing the decal. Peel the decal off of the backing sheet, careful not to touch the adhesive side of the decal too much. Carefully align it to a centered position (the decal is slightly smaller than the badge). Press the decal firmly down in the center to stick it in place, then use your thumbs to push out from the center to the edges. Repeat this process until you've stretched/pressed it firmly down around the curves. And that's it!
How-to Video:
Powerplus V-Cover Decal - Army
Regular price $20.00Fits the Indian Powerplus engine found on the Challenger, Pursuit, Powerplus Chieftain, and Powerplus Roadmaster models.
This premium finish badge cover takes minutes to install and provides a completely custom look. They fit both the left and right v-cover so if you haven't removed the right side cover for another intake, don't forget to grab two!
The v-cover decals are heavy-duty 12 mil laminated gloss vinyl that flow over the curves of the badge for a bespoke custom look.
These self-adhesive decals are applied by hand to the 1901 badge. If you've already removed the badge, you can use poster putty to fill in the embossed letters before applying our decal over it.
Installation: Be sure your v-cover badge is clean before installing the decal. Peel the decal off of the backing sheet, careful not to touch the adhesive side of the decal too much. Carefully align it to a centered position (the decal is slightly smaller than the badge). Press the decal firmly down in the center to stick it in place, then use your thumbs to push out from the center to the edges. Repeat this process until you've stretched/pressed it firmly down around the curves. And that's it!
How-to Video:
Powerplus V-Cover Decal - Air Force
Regular price $20.00Fits the Indian Powerplus engine found on the Challenger, Pursuit, Powerplus Chieftain, and Powerplus Roadmaster models.
This premium finish badge cover takes minutes to install and provides a completely custom look. They fit both the left and right v-cover so if you haven't removed the right side cover for another intake, don't forget to grab two!
The v-cover decals are heavy-duty 12 mil laminated gloss vinyl that flow over the curves of the badge for a bespoke custom look.
These self-adhesive decals are applied by hand to the 1901 badge. If you've already removed the badge, you can use poster putty to fill in the embossed letters before applying our decal over it.
Installation: Be sure your v-cover badge is clean before installing the decal. Peel the decal off of the backing sheet, careful not to touch the adhesive side of the decal too much. Carefully align it to a centered position (the decal is slightly smaller than the badge). Press the decal firmly down in the center to stick it in place, then use your thumbs to push out from the center to the edges. Repeat this process until you've stretched/pressed it firmly down around the curves. And that's it!
How-to Video:
Military Pin-up 869-Color Anywhere Decal
Regular price $15.00 Sale price $13.00 Save $2.00“Military Pin-up 869” Anywhere Decal
These decals are meant to be used anywhere. We wanted to provide more options that allow you to customize the look of your bike while using the same high-quality materials we use for our tank and saddlebag decals.
Size: 4.4 x 5 inches
Weatherproof laminated decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
Powerplus V-Cover Decal - Navy
Regular price $20.00Fits the Indian Powerplus engine found on the Challenger, Pursuit, Powerplus Chieftain, and Powerplus Roadmaster models.
This premium finish badge cover takes minutes to install and provides a completely custom look. They fit both the left and right v-cover so if you haven't removed the right side cover for another intake, don't forget to grab two!
The v-cover decals are heavy-duty 12 mil laminated gloss vinyl that flow over the curves of the badge for a bespoke custom look.
These self-adhesive decals are applied by hand to the 1901 badge. If you've already removed the badge, you can use poster putty to fill in the embossed letters before applying our decal over it.
Installation: Be sure your v-cover badge is clean before installing the decal. Peel the decal off of the backing sheet, careful not to touch the adhesive side of the decal too much. Carefully align it to a centered position (the decal is slightly smaller than the badge). Press the decal firmly down in the center to stick it in place, then use your thumbs to push out from the center to the edges. Repeat this process until you've stretched/pressed it firmly down around the curves. And that's it!
How-to Video:
Military Pin-up 869-B&W Anywhere Decal
Regular price Sale price $15.00“Military Pin-up 869” Anywhere Decal
These decals are meant to be used anywhere. We wanted to provide more options that allow you to customize the look of your bike while using the same high-quality materials we use for our tank and saddlebag decals.
Size: 4.4 x 5 inches
Weatherproof laminated decals are self adhesive. We recommend using the wet method to install these decals: A spray bottle with water and dish soap can be used to wet the surface and the back of the decal, allowing you to slide the decal into place. Once you have it aligned properly, use your thumbs to push the moisture out from behind the decal, working from the center outwards to the edges and it will adhere to your bike. Using the wet method allows the decal surface to evenly distribute over the curved surface. A hair dryer to apply heat will make the process easier since the vinyl becomes more soft and flexible when warm.
Powerplus V-Cover Decal - Coast Guard
Regular price $20.00Fits the Indian Powerplus engine found on the Challenger, Pursuit, Powerplus Chieftain, and Powerplus Roadmaster models.
This premium finish badge cover takes minutes to install and provides a completely custom look. They fit both the left and right v-cover so if you haven't removed the right side cover for another intake, don't forget to grab two!
The v-cover decals are heavy-duty 12 mil laminated gloss vinyl that flow over the curves of the badge for a bespoke custom look.
These self-adhesive decals are applied by hand to the 1901 badge. If you've already removed the badge, you can use poster putty to fill in the embossed letters before applying our decal over it.
Installation: Be sure your v-cover badge is clean before installing the decal. Peel the decal off of the backing sheet, careful not to touch the adhesive side of the decal too much. Carefully align it to a centered position (the decal is slightly smaller than the badge). Press the decal firmly down in the center to stick it in place, then use your thumbs to push out from the center to the edges. Repeat this process until you've stretched/pressed it firmly down around the curves. And that's it!
How-to Video:
Powerplus V-Cover Decal - Space Force
Regular price $20.00Fits the Indian Powerplus engine found on the Challenger, Pursuit, Powerplus Chieftain, and Powerplus Roadmaster models.
This premium finish badge cover takes minutes to install and provides a completely custom look. They fit both the left and right v-cover so if you haven't removed the right side cover for another intake, don't forget to grab two!
The v-cover decals are heavy-duty 12 mil laminated gloss vinyl that flow over the curves of the badge for a bespoke custom look.
These self-adhesive decals are applied by hand to the 1901 badge. If you've already removed the badge, you can use poster putty to fill in the embossed letters before applying our decal over it.
Installation: Be sure your v-cover badge is clean before installing the decal. Peel the decal off of the backing sheet, careful not to touch the adhesive side of the decal too much. Carefully align it to a centered position (the decal is slightly smaller than the badge). Press the decal firmly down in the center to stick it in place, then use your thumbs to push out from the center to the edges. Repeat this process until you've stretched/pressed it firmly down around the curves. And that's it!
How-to Video:
As a thank you for your service, we are happy to offer a discount to current military service members and veterans.
Decorate your home or garage with art prints featuring our work.
We promise not to bombard you with spam, AND, we'll send you exclusive discount codes to save you money when you shop our store! Be the first to know when we launch exciting new products!
