Braderie

CLEARANCE SALE - We are clearing out our old stock of retired designs and other non-current products at an extremely reduced price!

This listing is for 1 set of tank decals. These were supposed to be blue but printed a dark purple. See photos for details.

“Dark Purple" SWB-729 Tank Decal for Indian Challenger and Pursuit

Size: Covers a large portion of the tank side on Challenger and Pursuit models and should be centered during application for greatest appeal.

Weatherproof laminated decals are self adhesive. 

How To Install: <-Visit our How To page for videos

We recommend using the wet method to install larger decals:  A spray bottle with water and dish soap can be used to wet the tank and the back of the decal, allowing you to slide the decal into place.  To get the proper soap/water mix, start with a squirt of soap into your spray bottle.  Shake it up and then spray it on your hand.  Rub your finger tips together.  You should feel the slipperiness of the soap.  If it just feels like water, add more soap and try again.  Once you have it aligned properly, use a squeegee or some non-abrasive tool (even your fingers) to push the moisture out from behind the decal and it will adhere to your tank. A plastic putty scraper with a thin cloth wrapped around it will work great and prevent scratching your decals.

CLEARANCE SALE - We are clearing out our old stock of retired designs and other non-current products at an extremely reduced price!

This listing is for 1 set of tank decals. The blue fades to a lighter blue along the edges of the design as a result of a printing defect but still looks great if these colors are your thing. See photos for details.

“Blue" SWB-729 Tank Decal for Indian Challenger and Pursuit

Size: Covers a large portion of the tank side on Challenger and Pursuit models and should be centered during application for greatest appeal.

Weatherproof laminated decals are self adhesive. 

How To Install: <-Visit our How To page for videos

We recommend using the wet method to install larger decals:  A spray bottle with water and dish soap can be used to wet the tank and the back of the decal, allowing you to slide the decal into place.  To get the proper soap/water mix, start with a squirt of soap into your spray bottle.  Shake it up and then spray it on your hand.  Rub your finger tips together.  You should feel the slipperiness of the soap.  If it just feels like water, add more soap and try again.  Once you have it aligned properly, use a squeegee or some non-abrasive tool (even your fingers) to push the moisture out from behind the decal and it will adhere to your tank. A plastic putty scraper with a thin cloth wrapped around it will work great and prevent scratching your decals.

Article en commande spéciale (peut prendre environ 2 à 3 semaines avant l'expédition si nous ne l'avons pas en stock au moment de votre commande)

Autocollants de réservoir universels « Hissez le drapeau noir » pour toutes les marques et modèles de motos

"Tout homme normal doit parfois être tenté de cracher sur ses mains, de hisser le drapeau noir et de commencer à trancher la gorge." - HL Mencken

Ces autocollants ont été conçus pour s'adapter à presque toutes les marques ou modèles de vélos.

Nous vous recommandons de vérifier les mesures pour garantir un bon ajustement.

Taille : 5,83 pouces x 13,26 pouces

Ces autocollants sont conçus pour toutes les marques/modèles de motos. Vérifiez les mesures pour garantir un bon ajustement sur votre vélo avant de commander. Si votre réservoir possède déjà un graphique, nous ne pouvons pas garantir que ces autocollants le couvriront complètement.

Comment installer : <-Visitez notre page Comment faire pour les vidéos

Les autocollants en vinyle avec finition brillante HD résistante aux intempéries sont auto-adhésifs. Nous vous recommandons d'utiliser la méthode humide pour les installer. autocollants : un flacon pulvérisateur contenant de l'eau et du savon à vaisselle peut être utilisé pour mouiller le surface et le dos de l'autocollant, vous permettant de faire glisser l'autocollant en place. Une fois que vous l'avez correctement aligné, utilisez vos pouces pour repousser l'humidité derrière l'autocollant, en travaillant du centre vers l'extérieur vers les bords et il adhérera à votre vélo. L'utilisation de la méthode humide permet à la surface de l'autocollant de se répartir uniformément sur la surface incurvée. Un sèche-cheveux pour appliquer de la chaleur facilitera le processus puisque le vinyle devient plus doux et flexible lorsqu'il est chaud.

CLEARANCE SALE - We are clearing out our old stock of retired designs and other non-current products at an extremely reduced price!

This listing is for 1 set of tank decals with surface blemishes in the laminate layer. See photos for details.

“Blue" SWB-729 Tank Decal for Indian Challenger and Pursuit

Size: Covers a large portion of the tank side on Challenger and Pursuit models and should be centered during application for greatest appeal.

Weatherproof laminated decals are self adhesive. 

How To Install: <-Visit our How To page for videos

We recommend using the wet method to install larger decals:  A spray bottle with water and dish soap can be used to wet the tank and the back of the decal, allowing you to slide the decal into place.  To get the proper soap/water mix, start with a squirt of soap into your spray bottle.  Shake it up and then spray it on your hand.  Rub your finger tips together.  You should feel the slipperiness of the soap.  If it just feels like water, add more soap and try again.  Once you have it aligned properly, use a squeegee or some non-abrasive tool (even your fingers) to push the moisture out from behind the decal and it will adhere to your tank. A plastic putty scraper with a thin cloth wrapped around it will work great and prevent scratching your decals.